Back to results
PKLUM C250
Half-hinged access cover with hydraulic frame
Material
Casting manufactured in spheroidal-graphite cast iron (ductile cast iron) in accordance with the EN-1563 Standard.
Features
Square manhole cover with hydraulic frame. Half- hinged cover with a stable opening position at 105˚, equipped with guiding system for closing manoeuvres that ensures perfect fitting of cover in frame. The cover is supplied with a perimeter ridge that produces an hydraulic closing effect within the frame. Cover with a slot to facilitate lifting. Internal legs to improve installation. Opening force below 15 daN.
Coating
Epoxy-polyester with a thickness of 100 microns, free of solvents compliant with the standard 199/13/CEE, black RAL-9004.
* Locking system with pentagonal or hexagonal head screw and maneuver key
Request advice. Our engineering dept. will study your project
to propose the best solution. Call us +34 938 034 697
to propose the best solution. Call us +34 938 034 697
Other products that may interest you
Kerb drain
hinged grating with gasket
Rectangular hinged grating
Grating with hinge